正交各向异性单向复合材料裂纹尖端塑性区求解

基于复合材料力学基本理论,推导了Tsai-Hill准则、Hoffman准则和Tsai-Wu准则在平面问题下的一般表达式,在平面应力和应变状态下,得到复合材料中心裂纹板裂纹尖端塑性区的解析解.结果表明,基于Tsai-Wu准则得到的Ⅰ型、Ⅱ型和Ⅰ/Ⅱ复合型裂纹裂尖塑性区范围最小.平面应变状态下的裂尖塑性区范围小于平面应力状态下的裂尖塑性区范围.裂纹倾角β对复合材料裂尖塑性区范围和形状有明显影响,不同值得到的塑性区结果差别很大.不论是平面应力还是平面应变条件,裂纹尖端塑性区域都随着裂纹倾角的增大而增大.     

Storage life of silicone rubber sealing ring used in solid rocket motor

It is urgent to carry out detailed research on storage performance of rubber sealing ring to get the criterion for its storage life. This paper acquires material ageing regularity by theoretical analysis and experimental confirmation. On this condition, failure mode and failure criterion of typical sealing structure is studied, and the failure mechanism is found. Thus by analyzing the stress distribution, the relationship between ageing state and sealing condition is established. Rationalization proposal is put forward and storage life of sealing ring is evaluated. The research mentionedabove has special reference to the design of sealing structures and can provide reference for prolonging their service life.     

国有企业改制中收入激励的帕累托最优标准

收入对职工具有最直接的激励作用，而这一作用的保持与增强则取决于收入分配的科学性与合理性。国有企业正值改制时期，急需建立激励机制，制定科学合理的收入分配方案。综观国内外研究现状．企业职工的收入分配在实践中的标准是多样的，行动是盲目的。因此，探讨具有坚实经济理论支持的判断企业职工收入分配科学合理与否的理论标准，具有十分重要的意义。     

美国低空风切变危险性评估的研究概况

对美国在低空风切变的危险性评估及其准则、风切变模型及地面系统仿真等方面的研究概况作一介绍,最后找出我国在这方面研究的差距,并提出努力的方向。     

运动油滴/固体壁面斜碰撞的状态辨识及特征分析

 航空发动机轴承腔油气两相流动与换热研究是轴承腔润滑与换热设计的重要基础工作,而运动油滴与轴承腔壁面的碰撞状态辨识及特征分析是轴承腔油气两相流动与换热研究的组成部分。基于VOF方法建立了运动油滴与固体壁面斜碰撞数值仿真模型,实现了运动油滴与固体壁面斜碰撞状态的数值模拟,分析了碰撞油滴直径、入射角和碰撞速度对沉积油膜铺展长度、油膜堆积厚度和溅射油滴数目等碰撞状态特征参数的影响规律,提出了运动油滴与固体壁面斜碰撞条件下的状态判断准则,并得到了文献的物理试验工作的支持。研究结果表明:随着油滴入射角减小,沉积油膜铺展长度和油膜堆积厚度增大,溅射油滴数目减少;随着碰撞速度和油滴直径的增大,沉积油膜铺展长度和溅射油滴数目均增大,但油膜堆积厚度对应前者呈减小趋势、对应后者仍呈增大趋势。     

Effects of yaw-roll coupling ratio on the lateral-directional departure prediction and restraint

The experimental data obtained from yaw-roll coupled wind tunnel tests are used for lateral-directional departure prediction, by linearizing the_b model to extract nominal dynamic derivatives at each coupling ratio.The prediction results are compared with those of the existing engineering methods which are based on the conventional aerodynamic derivatives.The comparison shows that the yaw-roll coupling ratio has a great influence on the departure susceptibility.The departure resistance will loss in partial region of the coupling ratio when the angle of attack is higher than a critical value.According to the stable and unstable regions of coupling ratio, a two-segment stability augmentation system with two different feedback gain matrices is obtained by pole-placement method.The two-segment stability augmentation system is used in the simulations of straight and level flight, steady turn, spin recovery and Herbst maneuver.The simulation results are also compared with the applications of a fixed-gain stability augmentation system designed by the conventional aerodynamic derivatives.When the yaw-roll coupling effects are fully considered, the two-segment stability augmentation system is more effective for departure restraint and can provide a better flying quality with less control energy.     

利用模拟试验研究APC预测准则的适应性

使用多种飞机系统构型的人机耦合(APC)振荡地面模拟试验数据,研究各种Ⅰ类、Ⅱ类APC预测准则的适用性,通过对比分析试验中试飞员评分结果和各种准则计算结果,得到APC预测准则与试飞员APC趋势评分的符合率。研究结果表明,现有的APC预测准则并非预想的那样有效,进而针对APC预测准则和模拟试验提出改进建议。     

机载风切变系统告警准则研究

根据风切变对飞机飞行影响的机理,以及FAA对CATⅠ类着陆最坏条件下的边界要求,推导了风切变的危险程度判据。通过计算,分析了垂直风切变与水平风切变对飞行性能的影响的异同,并通过对危险判据与性能恶化参数的相关性研究,提出了适用于机载风切变探测告警系统的告警准则。     

空间目标监视雷达信号频率的优选准则

随着在轨微小卫星及空间碎片数量不断增加，为保证在轨卫星的运行安全，需要对微小目标进行有效跟踪探测及稳定编目。雷达作为近地空间目标监视的主用设备，在对厘米级小目标进行探测跟踪时，其工作频率是决定其能否可靠探测关键因素，高频有利于探测小目标，并可获得相对稳定的RCS，但高频信号的波束小、搜索能力较低，实现难度大，也使得成本过高。为适于实际工程应用，需从效费比出发，对频率进行优选。本文从目标RCS的角度提出一种空间目标监视雷达信号频率的优选准则，给出该准则下周长波长比ka的取值范围。为了更加清楚地说明该优选准则的应用，给出了直径5 cm和10 cm的目标在该准则下信号频率的取值范围，并与国外工作做了比较，证明该准则可行。     

A user-friendly yield criterion for metals exhibiting tension-compression asymmetry

The aim of this paper is to model the yielding asymmetry of pressure-insensitive metals, including but not limited to Ni₃Al alloys. The main focuses are put on the flexibility and manipulative convenience. The parameters of theory are kept to a minimum and can be determined by as few tests as possible. These requirements are fulfilled by constructing a yield function using the second and third-invariants of a linearly transformed stress tensor. The proposed yield criterion has a simple mathematical form and has only seven parameters when used in three-dimensional stresses. Compared with existing theories, the new yield criterion has much fewer parameters, which makes it very convenient for practical applications. The coefficients of the criterion are identified by an error minimization procedure. Applications to a Ni₃Al based intermetallic alloy as well as a Cu-Al-Be shape memory alloy and comparison to other criteria show that the proposed criterion has nearly the same predictive ability and flexibility with other criteria. The proposed yield criterion can estimate the coefficients by using less data, which is a big advantage compared with other similar theories, especially when there is a limited number of experimental data.